Black Magic Probe with JTAG Cable and Serial Cable - V2.3

The Black Magic Probe, designed by 1BitSquared with Black Sphere Technologies, is a next-generation debugging tool perfect for ARM Cortex microcontrollers. Unlike most dongles, the probe acts as its own GDB server port via USB serial connection eliminating the need for OpenOCD or STLink software. This fully open source hardware tool also includes a USB-serial adapter with socket headers for dual GDB and printf debugging.

Supported Targets include: STM32 (F0, F1, F2, F3, F4, F7), Atmel SAMD and SAM series, Nordic nRF51/nRF52, NXP LPC series, TI LM3S and TM4C, Freescale KL series, Xilinx Zynq-7000, Broadcom BCM2836 (Raspberry Pi 2), SiLabs EFM32 and EZR32.

Package Includes: 1 x Black Magic Probe, 0.05" pitch SWD/JTAG ribbon cable (150mm), 0.1" pin header serial cable (~145mm).

Features:

• GDB server port with no need for special PC software
• TTL level serial interface
• SWD and JTAG support
• Supports 1.7V to 5V targets
• Provides 3.3V to target (up to 100mA)
• Semihosting support
• Compatible with Linux, Mac, Windows
• Works with Eclipse and other IDEs
• DroneCode compatible

Capabilities:

• Load applications to target Flash or RAM
• Single-step through programs
• Run and halt programs in real-time
• Examine/modify CPU registers and memory
• Obtain call stack backtrace
• Set hardware assisted and software breakpoints/watchpoints

Revision V2.3 features an updated USB-C port.

Product dimensions: 35.0mm x 15.0mm x 12.0mm.