Rugged Metal On/Off Switch with Green LED Ring - 16mm

These chrome-plated metal buttons are rugged and visually appealing. Designed to be installed in a 16mm diameter hole, suitable for materials up to 1/2" thick, the button includes a rubber gasket to protect against water ingress.

The front features a flat metal actuator surrounded by a green plastic LED ring, which lights up with 3 to 6V input thanks to a built-in resistor. For higher voltages (12V or 24V), a 470 ohm resistor in series is recommended.

This is an on/off switch: pressing the button shorts the normally-open contact to the common contact and the button stays depressed. Pressing again releases the button and opens the contacts. The switch and LED operate independently, allowing flexible wiring configurations.

Features:

• Chrome-plated brass construction
• 16mm drill hole diameter
• Switch rating: 3A / 250VDC
• Switch contacts: 1 Normally Open (NO), 1 Normally Closed (NC)
• Contact resistance: < 50 mOhm
• Insulation resistance: > 1000 MOhm
• Operating temperature range: -20°C to +55°C
• Mechanical life: > 500,000 cycles
• Electrical life: > 50,000 cycles
• Panel thickness: 1-13mm
• Operating pressure: 1.5 - 2.5 N
• Operating stroke: 2mm
• LED rated voltage: 6V (with built-in resistor)

Ideal for rugged and professional projects requiring a durable metal on/off switch with LED indication.