NetPi - The Ultimate Ethernet Solution for Raspberry Pi Pico

NetPi - The Ultimate Ethernet Solution for Raspberry Pi Pico

Are you tired of limited internet connectivity options for your Raspberry Pi Pico? Do you want to connect your device to the world with ease?

Introducing NetPi - The Ethernet HAT for Raspberry Pi Pico.

NetPi is the perfect solution for your Raspberry Pi Pico's connectivity needs. It's an Ethernet HAT that enables your Pico to connect to the internet with ease. With support for various internet protocols such as TCP, UDP, WOL over UDP, ICMP, IPv4, and more, NetPi can be used to create IoT devices, robots, home automation systems, and industrial control systems.

NetPi - Ethernet Module for Raspberry Pi Pico

It has four independent SOCKETs that can be used simultaneously, and it also supports SOCKET-less commands like ARP-Request and PING-Request. The Ethernet HAT is equipped with 10Base-T/100Base-TX Ethernet PHY and auto-negotiation for full and half duplex with 10 and 100-based connections. With a 3.3V operation and 5V I/O signal tolerance, NetPi is ideal for a variety of applications.

NetPi Enables your Raspberry Pi Pico to connect to the internet with ease

- Plug & Play
Hardwired TCP/IP CHIP
Pico IO’s Access
5-way Joystick
Support Pico/Pico W
On-board RJ45

     The HAT also features a 1.3" TFT LCD with 240 x 240 pixels RGB and a 5-way joystick for a great user experience. NetPi is easy to install and use, and it's compatible with the Raspberry Pi Pico header. Upgrade your Raspberry Pi Pico's connectivity today with NetPi, the ultimate Ethernet solution.

    With a female pin header for direct attachment to Raspberry Pi Pico and breakout key pins for use with other host boards, NetPi is the ultimate solution for all your Ethernet needs. Operating at a temperature range of 40°C to 85°C and a current of 140mA, NetPi is built to withstand challenging environments.

    Don't let limited connectivity hold you back any longer. Get NetPi today and take your Raspberry Pi Pico to the next level of connectivity

    NetPi Features

    Support Hardwired Internet protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
    Four independent SOCKETs for simultaneous connections
    Perform SOCKET-less commands: ARP-Request, PING-Request
    Ethernet power down mode and Wake on LAN over UDP for energy-saving
    10Base-T/100Base-TX Ethernet PHY with auto-negotiation for full and half duplex with 10 and 100-based connections
    3V operation with 5V I/O signal tolerance
    Network indicator LEDs for full/half duplex, link, 10/100 speed, and active status
    Female pin header for direct attachment to Raspberry Pi Pico and breakout key pins for use with other host boards
    Operating temperature range of 40°C to 85°C
    Operating current of 140mA
    - 1.3" TFT LCD with 240 x 240 pixels RGB and 5-way joystick for user experience
    Dimension: 74.54 x 21.00 (mm)
    Storage condition: -55°C to 125°C
    Built-in RJ45

      Upgrade your Raspberry Pi Pico's internet connectivity with NetPi, the ultimate Ethernet solution. Get it today!

      Get NetPi today and take your Raspberry Pi Pico to the next level of connectivity for all your IoT, robotics, home automation, and industrial control needs.

      RELATED ARTICLES

      Leave a comment

      Your email address will not be published. Required fields are marked *

      Please note, comments must be approved before they are published